 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
MIL-R-23016(Wep)
Aluminum Antiseize Compound:
.1.2
Aluminum antiseize compound shall be used on all threaded aluminum-
alloy assemblies, except those involving machine screws or self-
tapping screws.
.1.3
Capacitor:
Air Dielectric Capacitors:
.1.3.1
Nominal spacing between opposing plates shall be not less than
0.012 inch and actual spacing not less than 0.008 inch, unless a
smaller nominal spacing is specifically approved by the procuring
activity. Where nominal spacing less than 0.012 inch has been
approved, the capacitors shall be enlosed in a dustproof case.
Plates of all air dielectric capacitors shall be free from grease,
dust, dirt and metallic burrs. Grease and other foreign matter
shall be remove d from the plates by cleaning the assembled capaci-
tor thoroughly with a non-corrosive solvent which will not impair
the proper functioning of the equipment. Rotors shall make low-
resistance contact with connectors. All capacitors, as installed
in the equipment, shall be able to withstand without breakdown at
least 500 volts rms, 60 cycles, between opposing plates. For
variable capacitors, this shall hold for any relative positions
of rotor and stator plates.
.1.3.2
Electrolytic
Capacitors:
The use of electrolytic capacitors is governed by the non-standard-
parts approval procedures given in 3.1.1.2.
.1.3.3
Fixed Paper Dielectric Capacitors:
Paper capacitors of characteristic D in accordance with specifica-
tion MIL-C-25 shall not be used. Molded paper capacitors shall
not be used.
.l.3.4
Spring Plate-Type Variable Capacitors:
Spring plate-type variable capacitors shall not be used.
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals