 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
4.4.4
Equipment Failure:
Should a failure occur during either the sampling or special
tests, the following action shall be taken:
(1) Determine the cause of failure.
(2) Determine if the failure is an isolated case or design
defect.
(3) Submit to the procuring activity for approval, proposed
corrective action intended to reduce the possibility of
the same failure(s) occurring in future tests.
(4) Where practical, include a test in the individual test
to check all equipment for this requirement until
reasonable assurance is obtained that the defect has
been satisfactorily corrected.
Life Test:
4.5
The contractor shall furnish all samples and shall be respon-
sible for accomplishing the life test. The test shall be of
300-hours duration and shall be conducted on equipments that
have passed the individual test. The life test shall be
performed under the conditions specified in 4.5.1. The life
test sample shall be selected by the government inspector in
accordance with the following; except that when a production
sample equipment is requested and submitted to the procuring
activity for test then the first equipment specified below
need not be selected or subjected to this test. (Equipments
which have successfully passed the sampling tests or special
tests may be selected for life tests.)
Quantity to be Selected
Quantity of Equipments
For Life Test
Offered for Acceptance
1
First 25
1
Next 175
1
Next 300
1 for each additional 500
or fraction thereof
127
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals