 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-25410G
6.
NOTES
(This section contains information of a general or explanatory nature
that may be helpful, but it is not mandatory).
6.1 Intended use. The oxygen regulators covered by this specification
are intended to provide crew members breathing oxygen with dilution at
altitudes up to 30,000 feet and with automatic pressure breathing at altitudes
from 27,000 to 43,000 feet and for emergency use up to 50,000 feet.
6.2 Acquisition requirements.
Acquisition documents should specify
the following:
a. Title, number and date of this specification, including any amendments.
b. Issue of DODISS to be cited in the solicitation, and if required, the
specific issue of individual documents referenced (see 2.1.1 and 2.2).
c. Applicable Government part number.
d. Applicable Qualified Products List.
e. Whether first article inspection is waived (see 4.4.1.1).
f. Name and address of the first article inspection laboratory (see
4.4.1.1) and the name of the Government activity responsible for
conducting the first article inspection program (see 4.4.1.1.1).
9. Name and address of the quality conformance verification inspection
laboratory {see 4.6) and the name of the Govenxmnt activity
responsible for conducting the quality conformance verification
inspection program (see 4.6).
h. Applicable levels of preservation, packaging, and packing (see 5.1 and
(see 5.2) including marking requirements (see 5.3) and special requirements
i. Items if data required (see 6.3).
6.3 Consideration of data requirements. The following data requirements
should be considered when this specitication is applied on a contract. The
applicable Data Item Description (DID'S) should be reviewed in conjunction
with the specific acquisition to ensure that only essential data are
requested/provided and that the DID's are tailored to reflect the requirements
of the specific acquisition, To ensure correct contractual application of the
data requirements, a Contract Data Requirements List (DD Form 1423) must be
prepared to obtain the data, except where DOD FAR Supplement 27.475-1 exempts
the requirement for a DD Form 1423.
Reference
DID
Suggested
DID
Tailoring
Number
Title
Paragraph
Use Contractor Format
4.4.1.1
DI-T-5329
First Article
Inspection
Reports
The above DID's were those cleared as of the date of this specification.
The current use of DOD 5010.12-L Acquisition Management Systems and Data
Requirements Control List (AMSDL), must be researched to ensure that only
current, cleared DID's are cited on the DD Form 1423.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals