That packages opened for examination shall be repackaged
b y the contractor at the contractor's expense (see 184.108.40.206).
D i s p o s i t i o n of endurance tested rifles (see 220.127.116.11),
(h) S h i p p i n g instructions for production samples and pilot
pack (see 3.1 and 5.1).
( i ) S e l e c t i o n of applicable levels of preservation, packaging
( j ) P a c k a g i n g instructions for repair parts (see 5.3).
(k) P l a c e of final inspection and acceptance (see "Notes" in
( l ) List of acceptance inspection equipment to be furnished
t h e contractor and responsibilities for other Government
p r o p e r t y to be furnished the contractor (see 18.104.22.168 and 6.7).
( m ) R e s p o n s i b i l i t i e s for furnishing ammunition (see 22.214.171.124
a n d 4.5.7).
( n ) S h i p p i n g instructions for rifles and parts when an inter
plant interchangeability test is required (see 126.96.36.199.2).
( o ) Procedures and methods for demilitarizing and disposing
o f rejected material.
(p) D i s p o s i t i o n of Government furnished property.
(q) R e s p o n s i b i l i t y f o r t e s t f i r i n g f a c i l i t i e s a n d o p e r a t i n g
p r o c e d u r e s (see 6.3).
6 . 2 Test firing facilities and operating procedures shall be designed
b y the contractor in conformance with local, state, and federal regulations.
a n d suitable for carrying out prescribed firing tests with safety of oper-
a t i n g and visiting personnel. C o p i e s of these contractor designs shall
b e forwarded to the contracting officer. G o v e r n m e n t facilities maybe
v i e w e d upon application to the contracting officer.
6.3 When action by a testing agency is required, work programing
w i l l be effected with the testing agency at the earliest practicable date.
6 . 4 To avoid delay in test firing, the Government representative
should maintain a minimum of two months' supply of ammnition as determined
b y anticipated firing requirements.
6 . 5 Monthly reports of the results of final examination and functioning
f i r i n g , targeting and accuracy, reliability and interchangeability tests
shall be made to Commanding General, U.S. Army Weapons Command, Attn: AMSWE-
RES, Rock Island, Illinois 61201 and to Commanding General, U.S. Army
Weapons Command, Attn: AMSWE-QA, Rock Island, Illinois 61201
6 . 6 When warranted, the contract should specify the application of
MIL-Q-9858 or MIL-I-45208, as appropriate} on the Management Control Systems
Summary List, DD Form 1660.
6 . 7 Unless otherwise specified (see 6.1p), the contract should
specify the application of MIL-I-45607 and MIL-C-45662 on the Management
Control Summary List, DD Form 1660.