 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-48595A(AR)
3.3.11 Input voltage variation. The rangefinder shall meet the ranging
accuracy specified in 3.3.7C with the input voltage of the prime source varied
between 18 Vdc and 30 Vdc. (See 4.6.2.11)
3.3.12 Power drain. The direct current drawn from the prime power source
shall be not greatcr than 12 amperes. (See 4.6.2.12)
3.3.13 Primary Power transient. The RANGE readout shall be unchanged
under the following conditions: (See 6.6.2.13)
a. With the input voltage dropped to 9.0 + 1.0 -0.0 volts for a
duration of 100 10 milliseconds.
With the input voltage increased to 90 + O -5 volts for a
b.
duration of 100 10 milliseconds.
3.3.14 Transmitter test. With the EMER POWER switch in the XMTR TEST
position and with the rangefinder fired, there shall be no MALF 3 indication
(See 4.6.2.14)
3.3.15 Built-in test (BIT). The rangefinder shall be capable of self
test in l ccordance with table III. (See 4.6.2.15)
3.3.16 Remote controlled operations. (See 4.6.2.16)
3.3.16.1 Remote power - ON. With the voltage of item 1.2 of table I
applied, the rangefinder shall be operational,
Controls and indicators test.
TABLE III.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals