 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-52000C(ME)
STANDARDS
MILITARY
MIL-STD-105
-
Sampling Procedures and Tables for Inspection by
Attributes.
MIL-STD-129
-
Marking for Shipment and Storage.
MIL-STD-130
-
Identification Marking of US Military Property.
MIL-STD-1188
-
Commercial Packaging of Supplies and Equipment.
DRAWINGS
ME
TA13217E7498
-
Reel, Cable.
TA13217E7499
-
Reel, Cable.
(Copies of specifications, standards, and drawings required by contractors
in connection with specific procurement functions should be obtained from the
procuring activity or as directed by the contracting officer.)
2.2 Other publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise indicated, the
issue in effect on date of invitation for bids or request for proposal shall
apply.
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
Boiler and Pressure Vessel Code, Section IX, Welding Qualifications.
(Application for copies should be addressed to the American Society of
Mechanical Engineers, 345 East 47th Street, New York, NY 10017.)
AMERICAN WELDING SOCIETY, INC. (AWS)
D1.1
Structural Welding Code, - Section 5, Qualification.
(Application for copies should be addressed to the American Welding
Society, 2501 N.W. 7th Street, Miami, FL 33135.)
3.
REQUIREMENTS
3.1 Description. The cable reels shall be in accordance with the
applicable drawings, and as specified herein. The reels shall be of steel and
when loaded with 100 pounds of cable shall be capable of being lifted axially
by the rim from two diametrically opposite sides without permanent deformation
of any part of the reel.
3.1.1 Drawings. The drawings forming a part of this specification are end
product drawings. No deviation from the prescribed dimensions or tolerances
is permissible without prior approval of the contracting officer. Where
tolerances could cumulatively result in incorrect fits, the contractor shall
provide tolerances within those prescribed on the drawings to insure correct
fit, assembly, and operation of the cable reels. Any data (e.g., shop
drawings, layouts, flow sheets, processing procedures, etc.) prepared by the
contractor or obtained from a vendor to support fabrication and manufacture of
the production item shall be made available, up[on request, for inspection by
the contracting officer or his designated representative.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals