 |
|||
|
Page Title:
Table II. Examination schedule. |
|
||
| ||||||||||
|
|  MIL-R-52453C(ME)
4.3.3.8 Electromagnetic interference. Unless otherwise specified, the roller shall be tested in
accordance with SAE J55l. A report tabulating the allowable maximum interference and the
measured interference shall be furnished with the preproduction model test report. Failure to
meet this requirement shall constitute failure of this test.
4.3.3.9 Sound level measurement. Unless otherwise specified the sound level shall be
conducted (see 6.2 and 6.7). Frequency measurements, dB(A) levels, instrument identification,
environmental information, and main sound source identification shall be reported.
4.3.3.9.1 Failure criteria. Failure to meet the criteria specified in 3.9 shall constitute failure
of the test.
4.4 Quality conformance inspection.
4.4.1 Examination. Each roller shall be examined for the characteristics as listed in Table II.
Presence of one or more defects shall be the cause for rejection.
Table II. Examination schedule.
Requirement
Number
Characteristic
Paragraph
101.
Engine not as specified.
3.11
102.
Power Train system not as specified.
3.12
103.
Suspension system not as specified.
3.13
104.
Hydraulic system not as specified.
3.14
105.
Brake system not as specified.
3.15
106.
Tires and rim not as specified
3.16
107.
Body and frame not as specified
3.10
108.
Operator's compartment not as specified.
3.18
109.
Fuel tank not as specified.
3.11.1
110.
Electrical system not as specified.
3.17
111.
Fungus and moisture resistance not as specified.
3.21
112.
Lifting and tiedown attachments not as specified.
3.19
113.
Oil sampling valve not as specified.
3.23
114.
Safety not as specified.
3.8
115.
Lubrication not as specified.
3.22
116.
Transportability not as specified.
3.5
117.
Ease of maintenance not as specified.
3.4
118.
Lighting not as specified.
3.17.1
119.
Materials not as specified.
3.3
120.
Toolbox not as specified.
3.27
121.
Data plates not as specified.
3.25
122.
Treatment and painting not as specified.
3.24
123.
Marking not as specified.
3.26
124.
Workmanship not as specified.
3.28
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals