 |
|||
|
Page Title:
Figure 1. Dimensions and configuration - Continued |
|
||
| ||||||||||
|
|  MIL-R-5757/10L
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
20.32
.800
9.68
.381
4.83
.190
2.39
.094
0.05
.002
22.22
.875
9.78
.385
5.08
.200
2.44
.096
0.13
.005
25.40
1.000
10.16
.400
5.23
.206
3.05
.120
0.25
.010
26.85
1.057
10.41
.410
5.33
.210
3.15
.124
0.38
.015
26.97
1.062
10.54
.415
5.38
.212
3.18
.125
0.51
.020
27.10
1.067
11.68
.460
5.46
.215
3.25
.128
0.64
.025
27.38
1.078
12.40
.488
5.59
.220
3.35
.132
0.76
.030
29.97
1.180
13.61
.536
5.89
.232
3.45
.136
1.19
.047
30.94
1.218
14.86
.585
6.40
.252
4.14
.163
1.57
.062
32.16
1.266
15.24
.600
7.19
.283
4.37
.172
1.63
.064
34.04
1.340
15.62
.615
9.12
.359
4.70
.185
2.03
.080
76.20
3.000
20.24
.797
9.14
.360
4.75
.187
2.06
.081
9.52
.375
NOTES:
1. Dimensions are in inches. Unless otherwise specified, tolerance is .010 (0.25 mm).
2. Metric equivalents are given for general information only.
3. Terminal X1 shall be identified by a bead of contrasting color. For tab mount orientation mark shall be
used. Terminal identification for reference only.
4. Two additional mounting holes positioned as shown are optional.
5. Symmetry of terminals and mounting means with respect to the relay shall be maintained (centerline).
6. Shape of lug (solder) terminals optional.
7. Relays with pin terminals shall not be used for plug-in socket applications.
8. All active electrical terminals shall be gold plated 0.00005 (50 microinches) minimum. One system for gold
plating that may be used is ASTM B488, type 3, class 1.25 with a nickel underplate of 50 to 150 microinches
thick. Gold plating of index pins is optional. The gold plating system shall enable the product to meet the
performance requirements of this specification and shall be approved by the qualifying activity.
FIGURE 1. Dimensions and configurations - Continued.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals