|
| MIL-R-5757/10L
ELECTRICAL DATA:
Run-in: Applicable.
Insulation resistance: 1,000 megohms minimum except the resistance between coil and case at high temperature
shall be 500 megohms or greater.
Dielectric withstanding voltage:
Sea level
Altitude
V rms (60 Hz)
V rms (60 Hz)
Between case, frame or enclosure, and all contacts both in
the energized and deenergized positions: -----------------------
1,000
Between case, frame or enclosure and coil: -------------------
500
350
Between all contacts and coil: -------------------------------------
1,000
All terminals
Between open contacts in the energized and deenergized
to case
positions: ----------------------------------------------------------------
500
Between contact poles: ----------------------------------------------
1,000
ENVIRONMENTAL DATA:
Temperature range: -65C to +125C.
Vibration: See table II.
Acceleration: Applicable.
Shock: 100 g's.
Resistance to soldering heat: Applicable to pin type (printed circuit) terminals.
Internal moisture: Applicable.
PHYSICAL:
Enclosure design: Hermetically sealed.
Terminal strength:
Solder lug: 3 pound-pull 0.3.
Pin type: 2 pound-pull 0.2.
Terminal twist test: Applicable to wire leads.
Sealed by welding: Applicable, except configurations D and E may be solder sealed.
Dimensions and configuration: See figure 1.
Termination: See table II.
Weight: .050 pound (22.68 grams).
Magnetic interference: Applicable.
8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |