 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-60040C (PA)
3.6 Continuity of strapping. - The resistance between
terminals 22, 23, and
shall be zero (0).
*3.7 Workmanship.- All parts and assemblies shall be
fabricated and finished (or fabricated and loaded) in a
through workmanlike manner, and all manufacturing, processing,
and assembly operations shall be correctly performed. They
shall be clean and free of burrs, sharp edges, unblended
radii, surface defects, chips , dirt, grease and oil (except
where specifically required), corrosion products and other
foreign matter. The cleaning method used shall not be
injurious to any part or assembly nor shall they be con-
taminated by the cleaning agent. Exterior surface coatings
shall be continuous except for a few light scratches not
exposing base material, All required markings shall be
neat and sharply defined. (Required packing shall be dry).
*3.8 Submission of results of contractor-conducted exam-
inations and tests. - The contractor shall forward copies of
the results of any of his examinations or tests to the de-
signated address as required by the contract. (see 6.6).
3.9 First article inspection. - This specification contains
technical provisions for first article inspection, Require-
ments for the submission of first article samples by the
contractor shall be as specified in the contract.
*4.
QUALITY ASSURANCE PROVISIONS
*4.1 Responsibility for inspection and standard quality
assurance provisions.
- Unless otherwise specified herein or
in the contract, the provisions of MIL-A-48078 shall apply
and are hereby made a part of this detail specification.
*4.2 Classification of inspections. - The following types
of inspection shall be conducted on this item.
First Article Inspection
a.
b.
Quality Conformance Inspection
*4*3
First article inspection.
*4.3.1 Submission. - The contractor shall submit a first
article sample (see 6.2b) as designated by the Contracting
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals