 |
|||
|
|
|||
| ||||||||||
|
| MIL-R-81965A (AS)
Interchangeability. All parts having the same part number shall be directly and com-
3.3
pletely interchangeable with each other with respect to installation and performance.
Identification of parts. All parts shall be marked as specified on the drawings listed in
3.4
the data list for the bomb rack being procured, or in accordance with MIL-STD-130, if not specified on
the drawings. The item identification and part number requirements of MIL-STD-100 shall govern the
part number and changes thereto.
3.5
Bomb rack.
Construction. The construction of the bomb rack shall be in accordance with the
3.5.1
drawings listed in the data list for the bomb rack being procured and as specified herein (see 6.2. lg).
Performance. The bomb racks shall satisfy all performance requirements when sub-
3.5.2
jected to the following inspections in the order specified in Tables I and II.
a.
Electromechanical Component Inspection (4.6.1)
Bomb Rack Inspection (4.6.2)
b.
Functional Test (4.6.3)
c.
Arming Mechanism (4.6.4)
d.
Electromagnetic Compatibility (4.6.5)
e.
f.
Secondary Systems (4.6.6)
Manual Operation (4.6.7a)
g.
Electrical Characteristics (4.6.7b)
h.
i.
Lag Determination (4.6.7c)
High-g Release (4.6.7d)
j.
k.
Sand (4.6.7e)
l.
Salt Spray (4.6.7f)
Shock Test (4.6.7g)
m.
Vibration Test (4.6.7h)
n.
Life Test (4.6.7i)
o.
Static Test (4.6.7j)
p.
Lock Shut Firing (Type I only) (4.6.8)
q.
Bomb rack hooks. The construction and inspection of the bomb rack hooks shall be in
3.6
accordance with MIL-H-85042.
Workmanship. The workmanship displayed in fabrication and assembly of the bomb
3.7
racks shall be such as to assure, within design limitations, the ability of the bomb racks to meet their
performance requirements under all applicable environmental conditions specified herein. Unauthorized
repair, welding, heavy burrs, or parts assembled by introduction of high stresses not prescribed in the
drawings, are typical signs of inferior workmanship and shall be cause for rejection. The standards of
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals