 |
|||
|
Page Title:
Figure 1. Dimensions and configuration |
|
||
| ||||||||||
|
|  MIL-R-83726/27K
Inches
mm
Inches
mm
Inches
mm
.001
0.03
.062
1.57
.400
10.16
.002
0.05
.078
1.48
.500
12.70
.005
0.13
.079
2.01
.800
20.32
.015
0.38
.094
2.39
1.025
26.04
.020
0.51
.140
3.56
1.250
31.75
.030
0.76
.200
5.08
1.300
33.02
.040
1.02
.270
6.86
1.830
46.48
.045
1.14
.313
7.95
2.118
53.80
2.707
68.76
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is .010 (0.25 mm).
3. Metric equivalents are given for general information only.
4. Terminal numbers shall not appear on the relay header. There shall be affixed to the relay a
legible circuit diagram which identifies each terminal location specified.
5. For mounting track, see MIL-PRF-12883/49. For bracket and socket assembly, see
MIL-PRF-12883/51.
6. Gasket material: Methylvinyl silicone; shore hardness A40.
7. Terminal plating: Shall provide the operational, environmental, and interface characteristics to
provide a reliable interconnect to gold plated contacts. Terminals except for the polarizing pin,
shall be gold plated. One system for gold plating that may be used is ASTM B488, type 3,
class 1.25 with a nickel underplate of 50 to 150 microninches thick. The gold plating system
shall
enable the product to meet the performance requirements of this specification and shall be
approved by the qualifying activity.
8. Knob and post shall be nickel plated (100 microinches thick minimum) 303 stainless steel.
FIGURE 1. Dimensions and configuration - Continued.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals