|
| MIL-R-85895 (AS)
Test Reports, Preparation of
MIL-STD-831
Airborne
Class)
(1,000
lb.
Suspension,
Lug,
MS-3314
Equipment
and Lightning Protection, for
Bonding, Electrical,
MIL-B-5087
Military Aircraft
2.1.2 Drawings.
The following drawing forms a part of
this
the issue shall be that in effect on the date of the solicitation.
Naval Air Systems Command
Lug, Suspension, MK-3 Mod 0
1380540
(copies of specifications, standards, and drawings required by
contractors in connection with specific acquisition functions should be
obtained from the contracting activity or as directed by the contracting
activity.)
In the event of a conflict between the text
2.2 Order of precedence.
of this specification and the references cited herein (except for
associated detail specifications, specification sheets or MS standards),
the text of this specification shall take precedence. Nothing in this
specification, however, shall supersede applicable laws and regulations
unless a specific exemption has been obtained.
REQUIREMENTS
3.
3.1 First article. When specified in the contract or purchase order, a
sample(s) shall be subjected to first articles inspection (see 4.3 and
6.3.1)
Specifications and
3.2 Selection of specifications and standards.
standards for necessary commodities and services not specified herein
shall be selected in accordance with the requirements of MIL-STD-143.
3.3 Interchangeability. All parts having the same part number shall be
directly and completely interchangeable with each other with respect to
installation and performance.
3.4 Identification and markinq. All parts shall be marked as specified
on the drawings for the bomb rack (see 3.5.1) or in accordance with
MIL-STD-130, if not specified on the drawings. The item identification
and part number requirements of DOD-STD-100 shall govern the part number
and changes thereto.
3.5 Bomb Rack.
The construction of the bomb rack shall be in
Construction.
3.5.1
accordance with the drawings listed in the data list for the bomb rack
being procured and as specified in the contract.
3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |