 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-16059B(SHIPS)
5.2.1.1.1.1 Assembled units, - The core of as-
handling shipment and storage, shall be in accord-
sembled units shall be thoroughly coated with lubri-
ance with Specification JAN-P-100.
cant conforming to Specification MIL-L-3545. The
ends, with end fittings attached, shall be capped
5.2. 1,2.1 Level A.- Material, packaged as
specified, shall be packed in containers conform-
with a double layer of greaseproof barrier material
ing to any one of the following specifications at the
conforming to Specification MIL-B-121, grade A
and held in place with pressure sensitive tape con-
option of the contractor.
forming to Specification PPP-T-60, type II or III,
class 1. Unit protection shall be in accordance
with method I of Specification MIL-P- 116.
PPP-B-591
Overseas type
5.2.1.1.2
Stock items. -
PPP-B-601
Overseas type
PPP-B-621
Class 2
5.2.1.1.2.1 Core. - Core shall be coated with
Class 2
PPP-B-636
preservative grease in accordance with Specifica-
MIL-B-10377
Overseas type
tion MIL-G- 16908, and spirally wrapped with bar-
rier material conforming to Specification MIL-B-
Shipping containers shall have caseliners con-
121, grade A. Unit protection shall be in accordance
forming to Specification MIL-L-10547, Case-
with method I of Specification MIL-P-116.
liners shall be closed and sealed in accordance
with the appendix to Specification MIL-L - 10547.
5.2.1.1.2.2 Casing. - The ends shall be capped
Caseliners for class 2 fiberboard boxes con-
with a double layer of barrier material conforming
forming to Specification PPP-B-636 may be
to Specification MIL-B- 121, grade A and held in
omitted provided all corners and edge seams
place with pressure sensitive tape conforming to
and manufacturer's joints are sealed with mini-
Specification PPP-T-60, type II or III, class 1. Unit
mum 2 inch wide tape conforming to Specifica-
protection shall be in accordance with method III
tion PPP-T-76. Boxes shall be closed, strapped
of Specification MIL-P-116.
or banded in accordance with the applicable
box specification or appendix thereto. The gross
5.2. 1.1.3 Unit containers. - Unit containers shall
weight of wood or wood-cleated boxes shall not
conform to the following specifications at the option
exceed 200 pounds.
of the contractor.
5.2. 1.2.2 Level B. - Material, packaged as
Specification
specified, shall be packed in boxes conforming to
PPP-B-636
any of the following specifications at the option of
PPP-B-665
the contractor:
PPP-B-676
Specification
pe and class
PPP-B-585
The gross weight of paperboard boxes shall not ex-
Class 1 or 2 use
ceed 10 pounds. Fiberboard boxes shall not exceed
PPP-B-591
Domestic type
40 pounds. Box closure shall be as specified in the
PPP-B-601
Domestic type
PPP-B-621
Class 1
applicable box specification or appendix thereto.
PPP-B-636
Class 1
MIL-B-10377
Domestic type
5.2. 1.1.4 Level C. - Preservation and packag-
Box closures shall be as specified in the appli-
ing of assembled units shall be sufficient to afford
cable box specification or appendix thereto. The
adequate protection against corrosion, deteriora-
gross weight of wood or wood-cleated boxes shall
tion and physical damage during shipment from the
not exceed 200 pounds.
supply source to the using activity and until early
installation.
5.2.1.2 Packing. - Lengths 10 feet or under
need not be coiled. When coiled, the diameter of
exterior shipping containers shall be marked in
the smallest coil shall not be less than the bend
accordance with Standard MIL-STD-129. )
diameter shown in table III. The coils shall be
held in place by at least four flat steel galvanized
6, NOTES
straps placed equidistant from each other around
the coil, Each container shall contain like items,
6.1 Ordering data. - Procurement documents
be of minimum cube and weight and when practica-
should specify the following:
ble contain an identical number of items, An-
choring, blocking, bracing and cushioning of
(a) Title, number, and date of this specifica-
container contents to prevent damage from
tion
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals