 |
|||
|
|
|||
| ||||||||||
|
|  APPLICABLE
PARAGRAPH OF
SPECIFICATION
Altitude: The starter shall be capable of meeting
3.5.8
rated speed and output torque at 8000-ft altitude
at rated inlet conditions. The starter shall
not be damaged when subjected to 75,000-ft alti-
tude in the overrunning mode of operation.
Attitude: The starter shall be capable of meeting
3.5.9
the operational requirements of this specifica-
tion when the starter centerline, taken through
the output shaft, is in any position within 10
degrees of the horizontal. position, unless
specified otherwise on this Specification Sheet.
Initial Calibration:
4.5.4
Drive Speed
Drive Speed
Drive Torque
( Lb-Ft )
(RPM)
Condition
230 Min, 385 Max
o
stall.
1100
Rated
195 Min ---
16 Min ---
3200 Min
cutout
Drive Speed
Airflow, Max
Drive Speed
Condition
(Lb per rein)
(RPM)
0
90
stall
4.5.5
Minimum Drive Speed (RPM): 3800
Endurance Test: Number of cycles: 1200; no lubricant
3.3.5
addition or change permitted, Each cycle shall consist
4.5.6
of three consecutive phases as follows:
Phase A -
Test Stand
Phase C -
Phase B-
Acceleration
Rotor Polar
Acceleration
At Following Conditions
Drive
Moment of
Time
Drive
Drive
Drive
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals