3 . 3 Dimensions.
Dimensions and tolerances shall be as specified
on the drawings,
Where tolerances are not given, the dimensions shall be
adhered to within limitations customary in good commercial practice.
Metal components shall be finished in accordance with
The surf aces of all components
requirements on the pertinent drawings.
shall be free from burrs, roughness, and excessive oxides or corrosion.
All identification nameplates and markings indicated
on the drawings shall be present and shall be clearly legible.
The stands shall be uniform in appearance and of
good quality} comparable to general commercial practice. They shall be
free from cracks, burrs, splits, sharp edges and other defects which may
hinder their functional operation or be injurious to handling personnel.
QUALITY ASSURANCE PROVISIONS
4 . 1 Contractors responsibility.
Unless otherwise specified herein
he supplier is responsible for the performance of all inspection require-
ments, prior to submission for Government inspection and acceptance,
Except as otherwise specified, the supplier may utilize his own facilities
r any commercial laboratory acceptable to the Government.
ecords of the examinations and tests shall be kept complete and available
to the Government as specified in the contract or order.