Sampling for examination shall be conducted in
accordance with Standard MIL-STD-105.
Lot size for examination shall be the individual sustainer
4 . 3 Lot.
The sample stands shall be carefully inspected and
measured to determine conformance with the requirements of this specifica-
tion and the applicable drawings.
The inspector shall ascertain that the packaging method
used will comply with the general requirements of this specification.
PREPARATION FOR DELIVERY
The lift trucks shall be packed for
5.1 Preservation and packaging.
domestic shipment in such manner as to insure acceptance by common carrier
for safe transportation at the lowest rate to the point of delivery. Adequate
protection from physical damage must be provided including protection
If the equipment is to be shipped overseas the
against damage by weather.
requirements for overseas shipment shall be applicable.
Unless otherwise specified, the sustainer test stand
shall be cleaned in accordance with Method C-1 of Specification MIL-P-116.