 |
|||
|
Page Title:
Solenoid, Electrical General Specification |
|
||
| ||||||||||
|
|  INCH-POUND
MIL-S-4040F
6 June 2003
SUPERSEDING
MIL-S-4040E
26 May 1995
MILITARY SPECIFICATION
SOLENOID, ELECTRICAL
GENERAL SPECIFICATION FOR
Inactive for new design after 28 June 1996.
No superseding specification.
This specification is approved for all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for electrical solenoids used to actuate various
devices through the conversion of electrical signals into mechanical motion. These solenoids are of the axial stroke
type and the rotary stroke type.
1.2 Classification. Solenoids are classified as follows:
Type
Duty
Rotation
Symbol
I
Pull
Continuous
N/A
II
Pull
Intermittent
N/A
III
Push
Continuous
N/A
IV
Push
Intermittent
N/A
V
Rotary
Continuous
Clockwise
VI
Rotary
Intermittent
Clockwise
VII
Rotary
Continuous
Counterclockwise
VIII
Rotary
Intermittent
Counterclockwise
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC/VAT, Post
Office Box 3990, Columbus, OH 43216-5000, by using the Standardization Document Improvement Proposal (DD
Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5945
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals