 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-4040F
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-202
-
Test Method Standard, Electronic and Electrical Component Parts.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the
Defense Automation and Production Service, Building 4D (DPM-DODSSP), 700 Robbins Avenue, Philadelphia, PA
19111-5094.)
2.3 Non-Government publications. The following document(s) form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue
of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS
are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI-Z540.1
-
Laboratories, Calibration, and Measuring and Test Equipment.
(Application for copies should be addressed to American National Standards Institute (ANSI), 11 West 42nd
Street, New York, NY 10036.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B633
-
Electrodeposited Coatings of Zinc on Iron and Steel.
ASTM B700
-
Electrodeposited Coatings of Silver for Engineering Use.
(Application for copies should be addressed to ASTM International, PO Box C700, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959.)
INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
ISO 10012-1
-
Quality Assurance Requirements for Measuring Equipment - Part 1: Metrological
Confirmation System for Measuring Equipment.
(Application for copies should be addressed to American National Standards Institute (ANSI), 11 West 42nd
Street, New York, NY 10036.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC (SAE)
SAE-AMS-QQ-N-290
-
Nickel Plating (Electrodeposited).
SAE-AMS-QQ-C-320
-
Chromium Plating (Electrodeposited).
(Application for copies should be addressed to Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth
Drive, Warrendale, PA 15096.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Product specification or engineering drawings. The individual item requirements shall be as specified herein
and in accordance with the applicable product specification or engineering drawing. In the event of a conflict between
the requirements of this specification and the product specification or engineering drawing, the latter shall govern.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals