 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-43292D
5.2.3 Commercial packing. Static lines or web assemblies, preserved as
specified in 5.1, shall be packed in accordance ASTM D 3951.
5.3 Palletization. When specified (see 6.2), static lines of one type only
or web assemblies, packed as specified in 5.2.2 and 5.2.3, shall be palletized
on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147.
Pallet types shall be type I (4-way entry), type IV or type V in accordance
with MIL-STD-731. Each prepared load shall be bonded with straps in
accordance with bonding means C and D or film bonding means F or G. Pallet
patterns shall be number 95 for the connector web assembly, and as stated in
table I for static lines, in accordance with appendix of MIL-STD-147.
5.4 Marking. In addition to any special marking required by the contract,
unit packs, interior packs, shipping containers, and palletized unit loads
shall be marked in accordance with MIL-STD-129 or ASTM D 3951, as applicable.
5.4.1 Polyethylene bagged unit packs. Polyethylene bagged unit packs shall
have the required identification information legibly printed or stamped in
black directly on the bag across the center face or on a white paper label
inserted within the bag so as to permit ready identification.
6.
NOTES
(This section contains information of a general or explanatory nature that
may be helpful, but is not mandatory.)
6.1 Intended use. The static lines and web assemblies are intended for use
as cargo parachute deployment or platform load transfer devices.
6.2 Acquisition requirements.
Acquisition documents must specify the
following:
a.
Title, number, and date of this specification.
b.
Type required (see 1.2).
c.
Issue of DODISS to be cited in the solicitation and if required,
the specific issue of individual documents referenced (see 2.1.1
and 2.2).
d.
When a first article is required (see 3.1, 4.3, and 6.3).
e.
Levels of preservation and packing (see 5.1 and 5.2).
f.
When weather-resistant grade fiberboard shipping containers are
required for level B packing (see 5.2.2.3).
g.
When palletization is required (see 5.3).
h.
Acceptance criteria required (see 6.5).
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals