 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-43292D
6.3 First article. When a first article is required, it shall be inspected
and approved under the appropriate provisions of FAR 52.209. The first
article should be a preproduction sample. The contracting officer should
specify the appropriate type of first article and the number of units to be
furnished. The contracting officer should also include specific instructions
in acquisition documents regarding arrangements for selection, inspection, and
approval of the first article.
6.4 Standard samples. For access to samples, address the procuring
activity issuing the invitation for bids.
6.5 Acceptance criteria. The acceptance criteria recommended below is
furnished only for guidance to the procuring activity The acceptance
criteria as specified in the contract or purchase order shall be binding.
Unless otherwise specified, the following acceptance criteria are in
accordance with MIL-STD-105.
6.5.1 For end item visual examination. An acceptable quality level (AQL),
expressed in terms of defects per hundred units, of 0.65 for major defects and
6.5 for total (major and minor combined) defects is recommended.
6.5.2 For end item dimensional examination. An AQL, expressed in terms of
defects per hundred units of 4.0 is recommended.
6.5.3 For packaging examination. An AQL, expressed in terms of dfects per
hundred units, of 2.5 is recommended.
6.5.4 For palletization examination. An AQL, expressed in terms of defects
per hundred units, of 6.5 is recommended.
6.6 Subject term (key word) listing.
Load transfer
Break-away
6.7 Changes from previous issue. Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extensiveness of the changes.
Preparing activity:
Custodians:
Army - GL
Army - GL
Navy - AS
(Project 1670-0768)
Air Force
99
Review activities:
Army - AV
Air Force - 11, 82
User activity:
Navy - MC
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals