 |
|||
|
Page Title:
Classification of defects for packaging. |
|
||
| ||||||||||
|
|  MIL-S-45921A(AR)
Examination for packaging defects specified in
c.
4.5.2.2.1 shall apply to each sample of stock assemblies without
but plate, interior packages, or exterior Containers, as
applicable.
4.5.2.2.1 Classification of defects for packaging. (Unless
otherwise specified in each listed defect, the packaging
requirements are specified on Packaging Data Sheet P5910348).
AQL
Defect
Categories
None Defined
Critical:
Major:
1.0
Illegible or incorrect marking.
101.
1.0
Improper location of marking.
102.
Improper level of packaging or
103.
1.0
packing (see procurement documents).
1.5
Inadequate cleaning and drying.
104.
1.5
Improper preservation application.
105.
1.5
106.
Improper closure of unit package.
Testinq.
4.5.3
testinq. Tests required by applicable
4.5.3.1 Material
drawings and specifications shall be performed on materials used in
the manufacture of stocks. The contractor shall furnish the
Government representative with certified copies of reports of all
tests as may be required for each lot of each material used. The
contractor shall also furnish the Government representative with
certification that the materials used in packaging conform to the
applicable specifications.
4.5.3.2 First article testing. Forty (40) stock assemblies
without butt plate shall be submitted by the contractor for first
article testing. The sample stocks shall be numbered 1 thru 40
using marking that will permit identification throughout the
inspection listed in Table I. The sequence shall be as prescribed
in Table I.
Failure of any stock to meet the requirements shall
be cause for rejection. Corrective action by the contractor shall
be as prescribed in the contract.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals