 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-48573(MU)
4.1.1 General provisions.- The component and subassembly inspection
requirements of MIL-F-13926 form a part of the quality assurance provis-
ions of this specification. Definitions of inspection terms shall be as
listed in MIL-STD-109.
4.2 First article (initial production) approval.- The requirement
for first article approval and the responsibility (Government or contract-
or) for first article testing shall be as specified in the contract. The
sample for first article approval tests shall consist of three sightunits
plus three each of all items covered by SQAP. The sample shall remanu-
factured in the same manner, using the same materials, equipment, processes,
and procedures as used in regular production. All parts and materials,
including packaging and packing, shall be obtained from the same source
of supply as used in regular production.
4.2.1 Government testing.- When the Government is responsible for
conducting first article approval tests, the contractors, prior to sub-
mitting the sample to the Government, shall inspect the sample ti insure
that it conforms to all the requirements of the contract and submit a
record of this inspection with the sample, including certificates of con-
formance for materials.
4.2.2 Contractor testing.- When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected by
the contractor for all the requirements of the contract. The sample and
a record of this inspection, including certificates of conformance for
materials, shall be submitted to the Government for approval. The Govern-
s the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product.- Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "submission of Product" provisions of
MIL-STD-105.
4.3.2 Lamination and tests.
4.3.2.1 Mount.- Themount' (see 3.3.2) shall have been inspected and
accepted in accordance with the inspection provisions contained in MIL-M-
48575 and the applicable Supplementary Quality Assurance Provisions (SQAP'S)
listed in the Technical Data package (TDP).
4.3.2.2 Telescope.- The telescope (see 3.3.1) shall have been inspect-
ed and accepted in accordance with the inspection provisions contained in
MIL-T-48574 and the applicable SQAP'S listed in the TDP.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals