 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-62101C
*
2.3 Order of precedence. In the event of a conflict between the text of this specification
and the references cited herein, the text of this specification shall take precedence. Nothing in
this document, however, supersedes applicable laws and regulations unless a specific exemption
has been obtained.
3. REQUIREMENTS
3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.8, the
vehicle, components, assemblies and accessories to be delivered under the contract shall be the
manufacturer's standard or optional items which meet or exceed the requirements of this
specification. All vehicle items shall be as represented in the vehicle and equipment
manufacturer's technical data. Technical data shall be limited to specifications and technical
material, identical to that furnished to the authorized company representatives for selection of
vehicle models and components, and shall be on file in the engineering offices of the procuring
activity prior to delivery of the items.
3.1.1 Special requirements. In addition to the standard vehicle and components specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
*
3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance
with MIL-STD-1223. As specified by the procuring activity for the appropriate service (see 6.2),
the exterior color shall be in accordance with MIL-STD-1223.
*
3.1.1.2 Marking and data plates. As specified by the procuring activity for the
appropriate military service (see 6.2), identification marking and data plates shall be in
accordance with MIL-STD-1223. When specified (see 6.2), concealed markings shall be
furnished.
*
3.1.1.3 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297.
*
3.1.1.4 Brake lights. At least one pair of brake lights shall override the four-way
emergency flashers or the two systems shall be independent of each other.
3.1.1.5 Wood treatment. Wood, except apitong, shall be treated in accordance with
MIL-STD-1223.
3.1.1.6 Additional data plates. Additional data plates depicting the maximum towing
speeds, permissible loads and permissible load distributions (see 3.3 through 3.4), shall be
provided. The plates shall indicate the maximum towing speeds with and without payload, the
maximum concentrated payload for each four foot segment of the entire length of the semitrailer,
including the gooseneck, and the longitudinal location, length and width(s) of the maximum
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals