 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-63348A(AR)
4.4.2 Inspection to be performed. The submachineguns shall be
subjected to the following tests, in the quantities as specified.
Number
Test
Test
To Test
Requirement
Method
Headspace
7
3.4.1
4.7.1
b.
Trigger Pull
7
4.7.3
3.4.2
Firing Pin Protrusion
7
3.3.4.2
4.7.2
d.
High Pressure Resistance
7
4.7.4
3.4.3
Function/Cyclic Rate of fire
e.
7
4.7.5 -
3.4.4
4.7.5.3.5
f.
Targeting and Accuracy
7
4.7.6 -
3.4.5
4.7.6.2.1
g.
Interchangeability
7
3.5
4.7.7.1
h.
Endurance
4
4.7.8 -
3.4.6
4.7.8.4.5
i.
High Temperature
3
3.4.7
4.80
j.
Low Temperature
3
4.81
3.4.8
4.4.3 Rejection.
If any assembly, component or test specimen
fails to comply with any of the applicable requirements, the first
article sample shall be rejected. The Government reserves the right
to terminate Its inspection upon any failure of any assembly,
component, or test specimen in the sample to comply with any of the
stated requirements.
4.4.3.1 Other criteria.
The following criteria also apply.
4.4.3.1.1 High
temperature functioning.
malfunctions (see shall
not exceed 10 per weapon nor a total
of. 18 for the three weapons combined. Any Class II or Class III
malfunction shall be cause for rejection of the First Article sample.
4.4.3.1.2 Low temperature functioning. Maximum Class I
malfunctions (see 6.5.5) shall not exceed 3 per weapon nor a total
of 6 for the three weapons combined. Any Class II or Class III
malfunction shall be cause for rejection of the First Article sample.
4.5 Quality conformance inspection.
4.5.1 Inspection lot.
4.5.1.1 Submachineguns.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals