 |
|||
|
Page Title:
Quality assurance terms and definitions. |
|
||
| ||||||||||
|
|  MIL-S-63348A(AR)
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified
in the contract or purchase ordert the supplier is responsible for
the performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract or order, the supplier
may use his own or any other facilities suitable for the performance
of the inspection requirements specified herein, unless disapproved
by the Government. The Government reserves the right to perform any
of the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements, The provisions of MIL-W-63150
shall apply.
4.2 Quality assurance terms and definitions. Quality assurance
terms and definitions are in accordance with MIL-STD-109.
4.3 Classification of inspection. The inspection requirements
specified herein are classified as follows:
a. First article inspection (see 4.4)
b. Quality conformance inspection (see 4.5)
4.4 First article inspection, The first article shall be
selected from submachineguns produced prior to the beginning of
quantity production and submitted for testing in accordance with the
contract requirements (see 6.1). The first article shall be
representative of production processes to be used during quantity
production.
The first article shall be subjected to all examination
tests specified in 4.4.2 and such other inspection as necessary to
determine that all the requirements of the contract have been met.
4.4.1 First article submission. The first article shall
consist of the following items in sample quantities as indicated:
Quanity
Part Description
Drawing
Submachinegun,
5.56MM, Port Firing, M231
9327045
7
The seven submachineguns shall be shipped to the Government
facility specified in the contract. Testing shall be as specified
in 4.4.2.
Submachinegun,
5.56MM, Port Firing, M231
9327045
5
The five submachineguns shall be held in bonded storage at the
contractor's site for the duration of the contract.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals