 |
|||
|
Page Title:
Quality conformance inspections. |
|
||
| ||||||||||
|
|  MIL-S-70454(AR)
same manner, using the same materials, equipment, processes, and
procedures as used in regular production. All parts and
materials, including packaging and packing, shall be obtained from
the same source of supply as used in regular production.
4.2.1 Government testing. When the Government is responsible
for conducting first article approval tests, the contractor, prior
to submitting the sample to the Government, shall inspect the
sample to insure that it conforms to all the requirements of the
contract and submit a record of this inspection with the sample,
including certificates of conformance for materials.
4.2.2 Contractor testinq. When the contractor is responsible
for conducting first article approval tests, the sample shall be
inspected by the contractor for all the requirements of the
contract. The sample and a record of this inspection, including
certificates of conformance for materials, shall be submitted to
the Government for approval. The Government reserves the right to
witness the contractor's inspection.
4.3 Quality conformance inspections.
4.3.1 Submission of product. Unless otherwise specified, by
the contracting officer, inspection lot size, lot formation, and
presentation of lots shall be in accordance with "Submission of
Product" provisions of MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Mount. The (see 3.3.2) shall have been
inspected and accepted in accordance with the inspection
provisions contained in MIL-M-70453 and the applicable Quality
Assurance Provisions (QAP's) listed in the Technical Data Package
(TDP).
4.3.2.2 Telescope. The telescope (see 3.3.1) shall have been
inspected and accepted in accordance with the inspection
provisions contained in MIL-T-70521 and the applicable QAP's
listed in the TDP.
4.3.2.3 Sightunit. Examination and tests related to Section
3 herein shall be performed in accordance with the sampling plans
specified in Tables I and II herein. Examination and tests for
packaging, packing, and marking shall be in accordance with DSAM
4145.8 and Section 5 herein. The tabulated classification of
defects in Tables I and II shall constitute the minimum inspection
to be performed by the contractor after first article approval and
prior to Government acceptance or rejection by item or lot.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals