100 Percent (100%) inspection
Telescope clamping mechanism
Note: The test in Table I shall be conducted at a temperature
between +60 and +90F (+16C to +32C).
The right is reserved to reject
any unit of product found defective.
Rejected units may be
repaired or corrected and resubmitted for inspection with the
approval of, and in the manner specified by the procuring activity.
Quality conformance inspection sampling.
Three sightunits shall be selected at random
from each 100 produced, or from each month's production, whichever
occurs first. The samples shall meet the requirements and tests
in Table II.
3.3, 3.3.1 &
Applicable drawings and
specifications - Visual
MIL-F-13926 - Visual
4.4.2 Noncompliance of sample. The right is reserved to
reject any unit of product found defective.
Should any one item
of a sampling fail to meet the specified test requirements,
acceptance of the represented inspection sample shall be suspended
by the Government.
Rejected samples shall be screened for all
Rejected units may be repaired or
corrected and resubmitted for inspection with the approval of, and
in the manner specified by the procuring activity.
4.5 Inspection equipment. Except as otherwise provided for
by the contract, the contractor shall supply and maintain
inspection equipment in accordance with the applicable
requirements of MIL-I-45607.
4.5.1 Government furnished inspection equipment. Where the
contract provides for Government furnished test equipment, supply
and maintenance of test equipment shall be in accordance with the
applicable requirements specified in MIL-I-45607.