|
| MIL-S-85419 (AS)
All ports shall be sealed by closures
5.2 Preservation.
conforming to MIL-C-5501. All exterior surfaces of the component
shall be protected by corrosion-preventative compounds conforming
to MIL-C-11796 or MIL-C-16173. The component shall then be
wrapped or bagged in Grade A greaseproof paper conforming to
MIL-B-121 and sealed with tape conforming to PPP-T-60.
5.3 Packaging.
5.3.1 Level A. Unless otherwise specified, each starter/APU
shall be packaged for shipment in accordance with MIL-P-116.
Method IIb of MIL-P-116 shall be employed for all starter/APUs
designated as installation starter/APUs. Method IId of MIL-P-116
shall be employed for all starter/APUs designated as spare
starter/APUs.
5.3.2 Level B. Starter/APU shall be packaged in accordance with
standard commercial practice.
Shipping containers insofar as practicable, shall
5.4 Packing.
contain an identical number of articles, shall be of a uniform
size, and shall be designed to enclose the contents in a snug,
tightfitting manner. When packed for shipment, the gross weight
of the exterior container shall not exceed 200 pounds. The above
applies to 5.3.1 and 5.3.2.
5.4.1 Level A. Starter/APUs packaged in accordance with 5.3.1
shall be packed in an exterior shipping container in accordance
with PPP-B-601 (overseas type) or PPP-B-621 (overseas type).
5.4.2 Level B. Starter/APUs packaged as specified in 5.3.1
shall be in an exterior shipping container conforming to
PPP-B-601 (domestic type) or PPP-B-585.
5.4.3 Level C. The interior packages shall be placed in
substantial commercial exterior shipping containers constructed
to insure acceptance by common or other carrier for safe
transportation at the lowest rate to the point of delivery.
Except as specified herein, the container shall conform to the
requirements of the Uniform Freight Classification Rules in
effect at the time of shipment.
5.5 Marking.
Each package and exterior shipping container shall
be marked to comply with MIL-STD-129 and to include the
following:
43
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |