 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-17491H (SA)
plated.
3.10 Identification marking. Trucks shall be identified in accordance with
MIL-STD-130. The marking shall be applied to the trucks on plates conforming
to MIL-P-514, type I, style 1, composition C or type I, grade A, class 1
material. The plate shall be installed in a visible and protected location on
the truck with the following information indented or embossed or otherwise
permanently marked on the plate:
PALLET, MANUAL-HYDRAULIC
TRUCK, HAND, LIFT:
POUNDS (KILOGRAMS)
CAPACITY
H OF MANUFACTURER
SERIAL NUMBER
MODEL NUMBER
(month and year )
DELIVERY DATE
CONTRACT OR ORDER NUMBER
U.S.N REGISTRATION NUMBER
3.11 Maintenance. Provisions shall be made for adjustment, service, and
replacement of wheels, axles, wearing parts of lift mechanism, steering
assembly,hydraulic pumps and brake system components. There shall be no
interference to the servicing and draining of oils and lubricants to or from
any assembly or components by frame members or other obstruction.
3.12 Interchangeability. All parts of any one truck shall be so fabricated as
to be interchangeable with the like parts of any of any other truck furnished under
any one contract.
3.13 Workmanship. The trucks shall withstand any operation specified herein
without permanent deformation, breakage of connections, malfunction, or
component interference caused by incorrect workmanship. All parts of the
trucks before and after painting shall be clean and free from sand, rust, dirt,
fins, pits, sprues, scale, flux, and other `harmful extraneous materials. Edges
and surfaces exposed to operating and maintenance personnel shall be smooth and
rounded to the extent that a hazardous surface does riot exist.
3.13.l Castings. Castings shall be of uniform quality and rendition, free
from blowholes, porosity, hard spots, shrinkage defects, or cracks. Castings
shall be commercially machinable and shall not be repaired, plugged or welded.
3.13.2 Bolts and nuts. Boltholes shall be accurately formed. Washers or
lockwashers or a combination of the two shall be provided on all bolts., studs,
and capscrews having straight threads. Self-locking nuts are acceptable in
lieu of standard nuts and lockwashers. All fasteners shall be correctly
torqued and nuts shall have full thread engagements Bolts shall not extend
through nuts more than four full threads.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals