(c) Inspection of preparation for delivery (see 4.6).
4.3 Preproduction inspection
4.3.1 Examination. The truck snail be examined as specified in 4.5.1.
Presence of one or more defects shall be cause for rejection.
4.3.2 Tests. The truck shall be testd as specified in 4.5.2.l through
126.96.36.199 reapplicable. Failure of any test shall be cause for rejection.
4.4 Quality conformance inspection.
specified (see 6.2). sampling for examination and tests
4.4.1 Sapling. When
with MIL-STD-105. A lot shall consist of all trucks
shall be in accordance
at one time. The sample unit for his inspection shall
offered for acceptance
be one fully assembled
188.8.131.52 Preproduction truck. Unless otherwise specificatied, a preproduction
truck shall be examined in accordance with 4.5.1 and shall be-tested in
accordance with 184.108.40.206, 220.127.116.11, 18.104.22.168, and 22.214.171.124. In addition, the
brakes and hydraulic pressure release, if provided,shall be activated and
Observed for normal function on a level surface. Failure to meet specified
requirements or to function properly shall be cause for rejection.
4.4.2 Examination. Samples selected in accordance with 4.4.1 shall be
examined as specified in 4.5.1. Inspection shall be level II with an AQL of
1.5 for major defects and 4.0 for total defects, expressed in terms of detects
per hundred units.
4.4.3 Tests. Samples selected in accordance with 4.4.1 shall be tested as
specified in 4.5.2.l through 126.96.36.199 and 188.8.131.52 through 184.108.40.206. inspection
level shall be S-1 with an AQL of 4.0 defects expressed in terms of defects per
4.5 Inspection procedure
The trucks shall be examined as specified herein for the
Dimensions not as specified.
Any characteristic not in accordance with specified
Part missing or not specified type or size.
Assembly or components fractured, split, bowed or malformed.
Part misplaced, loose, or not in correct alinement.
Sharp burr, sliver, or splinter.