4.6 Inspection of packaging and preparation for delivery.
4.6.1 Quality conformance inspection of pack.
22.214.171.124 unit of product. For the purpose of inspection, a completed pack
prepared for shipment shall be considered a unit of product.
Sampling for examination shall be in accordance with
126.96.36.199 Examination. Samples selected in accordance with 188.8.131.52 shall be
examined for the following defects. AQL shall be 2.5 percent defective,
inspection level II.
Materials, methods, or containers not as specified for level A or B.
Each incorrect material, method or container shall constitute one
Disassembly not as specified for level A.
Removed components not secured as specified for level A.
Lubrication not applied as specified for level A or C.
Unpainted surfaces not coated with preservation as specified for
Hydraulic system not filled as specified for level A or C.
Manual not preserved and secured as specified for level A or C.
Blocking, bracing, and anchoring not adequate to prevent movement and
damage as specified for level A or B.
Strapping not zinc coated for level A.
Marking missing, illegible, incorrect, or incomplete.
Preservation and packaging shall be level A
5.1 Preservation and packaging.
or C as specified.
5.1.1 Level A.
184.108.40.206 Lubrication. All grease fittings and the parts lubricated by the
fittings shall be charged to capacity with the lubricant recommended by the
equipment manual or as recommended by the supplier.
220.127.116.11 Unprotected surfaces. Unpainted exterior metal surfaces of components
requiring the application of a contact preservative shall be coated with-type
P-1 preservative. The preservative shall conform to the applicable
specification listed in and shall be applied in accordance with MIL-P-116.