 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-17491H(SA)
When wheels and rollers of conductive nonsparking type of impregnated
(d)
synthetic manganese, bronze or brass material are required (see
3.5.4).
When front wheels and tire requirements other than specified are
(e)
required (see 3.5.4.1).
Type of rear wheels required when other than as specified (see
(f)
3.5.4.2).
When plastic wheels are required for size A trucks (see 3.5.4.2).
(g)
Color of finish if other than specified (see 3.9).
(h)
Finish coat when other than as specified (see 3.9).
(i)
Plating required for components of trucks (see 3.9.2).
(j)
(k) Level of preservation and packaging, and level of packing required
(see 5.1 and 5.2).
(1) When sampling is required (see 4.4.1).
6.3 Preproduction model. Any changes or deviation of production trucks from
the approved preproduction model during production will be subject to the
approval of the contracting officer. Approval of the preproduction model will
not relieve the supplier of his obligation to furnish trucks conforming to this
specification.
6.4 Technical manuals. The requirement for technical manuals should be
considered when this specification is applied on a contract. If technical
manuals are required a contract exhibit must be prepaired to fully describe
statement of work criteria and delivery instructions, and cite the applicable
technical manual specification. The technical manuals must be acquired by
seperate contract Line Item Number (CLIN) in the contract."
Preparing activity:
Review activities:
Custodians:
Navy - SA
Navy - OS,SH
Navy - SA
Project No. 3920-N170
User activities:
Navy - OS,SH
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals