 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-18232B(AS)
3.1.21.3
(cont)
threaded tapered fasteners or other compensating assembly devices shall be
utilized to simplify assembly and reduce maintenance. Load-carrying doors shall
not be used where removal is necessary for periodic inspection. Readily operated
approved flush-type fasteners of corrosion-resistant construction shall be used
to secure cowling, doors and covers which must be opened at frequent intervals.
3.1.22
LUBRICATION. - Provision shall be made for adequate lubrica-
tion of all parts subject to wear. Lubrication shall be in
accordance with Specification MIL-STD-838. All lubrication fittings shall be
readily accessible. Provision for lubrication need not be made for antifriction
bearings, or for integrally lubricated bearings. Parts subject to immersion in
sea water shall be designed to exclude sea water from bearings or provide for
pressure lubrication that will force sea water out of such bearings.
3.1.23
FINISH. - Finish shall be in accordance with Specification
MIL-F-7179.
3.1.23.1
EXTERIOR COLOR. - Exterior color shall be in accordance with
Specification MIL-C-18263.
3.1.23.2
EXTERIOR MARKINGS. -The contractor shall apply the target
model designation and serial number in accordance with Speci-
fication MIL-I-18464. We contractor shall request the serial numbers from
NAVAIR at least 30 days prior to delivery of the first target.
3.1.24
IDENTIFICATION AND MARKING
3.1.24.1
NAME PLATE. - A manufacturer's name plate or decalcomania as
specified in MIL-STD-130 shall be provided in the interior of
the fuselage. The name plate shall indicate the model designation of the target,
date of acceptance, contract number and the target serial number. Components
requiring nomenclature shall have nameplates in accordance with MIL-N-18307. If
the target and components thereof are guaranteed or warranted by the terms and
conditions of the contract under which they are delivered the expiration date of
said provision shall be noted on the nameplate or decal.
3.1.24.2
MARKING OF PARTS. - Interchangeable spare parts and assemblies
requiring identification by part number shall be numbered by
the use of a rubber type stamp using waterproof ink, covered by one coat of clear
lacquer, pressure sensitive labels or by a stencil or brush using non-hydroscopic
ink, metal stamp or etch. The date of acceptance by the Government shall be
clearly indicated adjacent to the part number.
3.1.25
EQUIPMENT AND FURNISHING INSTALLATION
23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals