 |
|||
|
Page Title:
Selection of specifications and standards |
|
||
| ||||||||||
|
|  AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
Hydrophobic Surface Films by the Water-Break Test, Test
ASTM-F22
Method for
*ASTM-D1OO2
Strength Properties of Adhesives in Shear by
Tension Loading (Metal-to-Metal), Test Method for
Indentation Hardness of Rigid Plastics by Means of a
*ASTM-D2583
Barcol Impresser, Test Method for
*ASTM-D3951
Commercial Packaging, Practice for
*DOD Adopted
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
ICU Polyisocyanurate Foam (Avco Systems Division)
ASD-M10357
(Application for copies should be addressed to the AVCO Systems Division,
201 Lowell Street, Wilmington, MA 01887.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein (except for associated
detail specifications, specification sheets or MS standards), the text of this
specification shall take precedence. Nothing in this specification, however,
shall supersede applicable laws and regulations unless a specific exemption
has been obtained.
3. REQUIREMENTS
3.1 Selection of specifications and standards. Specifications and
standards for necessary commodities and services not specified herein shall be
selected in accordance with MIL-STD-143, MIL-BULL-147, and MIL-BULL-544.
3.2 Type I and Type II tanks. Unless otherwise specified, the following
paragraphs pertain to both Type I (non-survivable) and Type II (survivable)
external fuel tanks.
3.3 First article. When specified in the contract or purchase order, a
sample shall be subjected to first article inspection (see 4.3.1 and 6.3).
3.4 Materials. Materials shall conform to applicable specifications and
shall be as specified herein. Materials which are not covered by applicable
specifications, or which are not specifically described herein, shall be of
the best quality, of the lightest practical weight, and suitable for the
purpose intended.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals