Click here to make tpub.com your Home Page

Page Title: Circuit voltage
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-45379D(AT)
3.5.10.5.2 Circuit voltage. Voltage at the smoke grenade discharger firing pins shown in
figure 6 shall be as indicated in table XVIII when the power-on (ready) lamp is illuminated and
the appropriate firing pushbutton is actuated (see 4.6.4.10.5.2).
TABI.E XVIII. Smoke grenade discharger firing pin voltage.
Firing
Left discharger
Right discharger
Voltage
Pushbutton
firing pins
firing pins
RIGHT
1, 2, 5
3, 4, 6
Vehicle
(see 3.3.17.6)
RIGHT
3, 4, 6
1, 2, 5
0 + 0.5 V dc
Vehicle
LEFT
3, 4, 6
1, 2, 5
(see 3.3.17.6)
0 + 0.5 V dc
LEFT
1, 2, 5
3, 4, 6
3.5.11 Reliability operation. During 4000-mile reliability operational tests, the vehicle
combat loaded or with a simulated load of equal weight shall be capable of operating as follows
(see 4.6.4.11).
a. 25 percent on paved roads, either concrete or asphalt, or any combination of the two.
b. 25 percent on gravel and dirt roads with at least 10 percent of this distance under mud
conditions.
c. 25 percent on level, cross country.
d. 25 percent on hilly cross country.
3.6 Environmental. The vehicle shall operate in ambient air temperature of 115 to -25F,
and with special equipment installed, at temperatures to -65 F. The complete vehicle, when
prepared for storage, shall withstand temperature extremes of 160 to -65F without deterioration
of any component that may cause failure of the systems and/or subsystems (see 4.7).
3.7 Welding repairs. Welding repairs of any type or class shall be made only when, and to
the extent, specifically authorized by the acquisition activity (see 4.8).
3.8 Painting. Unless otherwise specified (see 6.2), the exterior and interior of the vehicle
and all components, assemblies, subassemblies, and parts that require painting shall be prepared
and painted in accordance with MIL-STD-193. Vehicle exterior paint shall be Forest Green
Camouflage, lusterless enamel, Alkyd, per MIL-E-52798. The vehicle interior paint shall match
color chip 17875 of FED-STD-595. All sliding parts and operating contact surfaces shall be free
of paint (see 4.9).
35

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business