 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46324D(MU)
4.2.1 Government testing. - When the Government is responsible for
conducting first article approval tests, the contractor, prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a
record of this inspection with the sample, including certificates of
conformance for materials.
4.2.2 Contractor testing. - When the contractor is responsible
for conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product. - Unless otherwise specified by the
contraction officer, inspection lot size, lot formation and presentation
of lots shall be in accordance with "Submission of Product" provisions
of MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. - All components and subassemblies
shall be inspected in accordance with the inspection provisions contained
in Supplementary Quality Assurance Provisions (SQAP) listed in the techni-
cal data package (TDP). In the absence of SQAPS, the applicable Quality
Assurance Provisions of MIL-F-13926 shall apply. Examination and tests
related to Section 3 herein, shall be performed on a single defect
(individual characteristic) basis in accordance with MIL-STD-105 and the
sampling plans specified in Tables I, II and III herein. Examination
and tests for packaging, packing, and marking shall be in accordance with
MIL-P-14232 and Section 5 herein. The tabulated classification of defects
in Tables I, II and 111 shall constitute the minimum inspection to be
performed by the supplier after first article approval and priot to Govern-
ment acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
REQUIREMENTS
TEST PROCEDURE
CLASS
CRITICAL: NONE
MAJOR: AQL 0.65% Defective
4.6.2
3.5.2
Vibration
101.
4.6.3
3.5.3
102.
Sealing
4.6.4
3.5.4
103.
Cleanliness
4.6.5
3.6.3
104.
Resolution
4.6.6.1
3.6.1
105.
Collimation
4.6.6.2
3.6.2
106.
Parallax
4.6.6.3
3.6.4
Parallelism of reticle
107.
and image
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals