 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46324D(MU)
3.6.5
108.
Reticle accuracy
4.6.6.4
3.6.6
4.6.6.5
109.
Eyepiece focus
3.6.7
4.6.7
110.
Illumination
111.
Workmanship
3.4
4.6.8
MINOR: NONE
NOTE: The tests in Table I shall be conducted at a temperature between
60 and 90F.
4.3.3 Acceptance and rejection. - Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and resubmittance of rejected lots shall be in accordance with "Acceptance
and Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General. - One telescope shall be selected at random as a
special sampling from each 100 produced. The sample shall meet the
requirements and tests in Table II.
TABLE II
NO.
CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
301.
3.1
Applicable Drawing
Fabrication
Visual
MIL-F-13926, Visual
302.
General specification
3.2
NOTE: The tests in Table II shall be conducted at a temperature between
60 and 90F.
4.4.2 Environmental. - Three telescopes shall be selected at random
as samples from each 50 produced, or from each month's production, which-
ever occurs first. Each sample shall meet the requirements and tests in
Table 111 and shall then meet the requirements and tests in Table 1.
TABLE III
NO.
CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
3.5.1
4.6.1
303.
Storage temperature (-80F)
4.6.1,
3.5.1,
304
Condensation (low temperature
q
3.5.3.1
4.6.1.1
-80F)
3.5.1
305.
Storage temperature (+160F)
4.6.1.2
4.4.3 Failure of sample. Should any one item of a special sampling
fail to meet the specified test requirements, acceptance of the represented
inspection lot shall be suspended by the Government until necessary correc-
tions have been made by the contractor and the resubmitted items have been
approved (see 4.3.3).
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals