|
| MIL-T-48134A (MU)
4.3.5.4 Handle (see dwg. 8800928 covering a detail of
dwg. 9227694) .
4.3.5.5 Boot (see dwg. 8800927 covering a detail of dwg.
9227694).
4.4 Test Methods and Procedures
4.4.1 Embrittlement of Springs. - The spring under test
shall be stretched unti l the minimum point of permanent distortion
is reached.
If the spring breaks when extended to the point of
distortion, it shall be classed defective.
4.4.1.1 Embrittlement of Spring After Testing, - Springs
will be subjected to compression for a minimum of 24 hours at
the assembled heights before testing as specified in 4.4.1.
23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |