 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-48466B(AR)
or inspections (including workmanship) required shall be
performed by examination visually or through the use of standard
measuring equipment in accordance with 3.1.2.
4.6.5 Packaging inspection. The sampling and inspection of
the preservation, packaging, packing and container marking shall
be in accordance with MIL-STD-2073-1.
5.
PACKAGING
5.1 Packaging, packing and marking.
Packaging, packing and
marking shall be in accordance with packaging data sheet
PS11733300.
The level of projection shall be as specified in the
procurement document (see 4.5.3, 6.2 and 6.7).
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The Cable Test. Set is intended to be used
to test XM21 ballistic computer, AN/VVG-2 Laser Rangefinder and
the AN/VSG-2 Tank Thermal Sight Cables.
Acquisition documents must
6.2 Acquisition requirements.
specify the following:
a.
Title, number and date of t-his specification.
b.
Issue of DODISS to be cited in the solicitation, and
if required, the specific issue of individual documents referenced
(see 2.1).
c.
Inspection provisions for first article (see 6.3).
d.
Applicable levels of preservation, packaging, packing
and container marking (see 5.1 and 6.7).
6.3 First article.
The contracting officer should provide
specific guidance to offerors for the submission of a first
article sample to be tested as specified in 4.4.2. The
contracting officer should also include specific instructions in
acquisition documents regarding arrangements for examinations,
approval of first article test results, and disposition of first
articles.
Invitations for bids should provide that the Government
reserves the right to waive the requirement for samples for first
article inspection to those bidders offering a product which has
been previously acquired or tested by the Government, and that
bidders offering such products, who wish to rely on such
production or test, must furnish evidence with the bid that prior
Government approval is presently appropriate for the pending
contract .
Bidders should not submit alternate bids unless
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals