 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-50009A
agent shall be the diacid aluminum soap of
MIL-STD-129 -- Marking for Ship-
isooctanoic acid (3.1.1.1).
ment and Storage.
MS602
-- Test Solvent (f o r
3.1.1.1 Isooctanoic acid. The isooctanoic
Fuel Thickeners).
acid shall consist of a mixture of acids de-
rived from isooctyl alcohol or isooctyl alde-
(Copies of specifications, standards, drawings,
hyde and shall contain principally dimethyl-
and publications required by suppliers in connection
with specific procurement functions should be ob-
hexanoic acid, methyl heptanoic acid, and
tained from the procuring activity or as directed
methylethylpentanoic acid .
by the contracting officer.)
3.2 Gel formation. All gels, prepared and
2.2 Other publications. The following docu-
tested as specified in 4.5.1, shall have a vor-
ments form a part of this specification to the
tex time of not more than 300 seconds.
extent specified herein. Unless otherwise in-
dicated, the issue in effect on date of invita-
3.3 Gel consistency.
tion for bids shall apply.
3.3.1 Two-percent gel.L All 2-percent gels
INTERSTATE C OMMERCE C O M M I S S I O N
prepared and tested as specified in 4.5.2
Interstate Commerce
49 CFR 71-90 --
shall have a consistency of not more than
Commission Rules and Regulations
300 grams (g) nor less than 180 g after
for the Transportation of Explosives
storage at 77 2F. The average results
and Other Dangerous Articles.
of duplicate tests on two specimens shall
agree within 50 g.
(The Interstate Commerce Commission regula-
tions are now a part of the Code of Federal Regula-
tions (Revised 1956) available from the Superin-
3.3.2 Four-percent gels. All 4-percent gels
tendent of Documents, Government Printing Office,
prepared and tested as specified in 4.5.2 shall
Washington 25, D. C. Orders for the above publica-
have a consistency of not more than 650 g
tion should cite "49 CFR 7190 (Rev. 1956) .")
nor less than 400 g after storage at 77
2F., and not more than 600 g nor less than
A M E R I C A N S O C I E T Y F OR T E S T I N G
MATERIALS
350 g after storage at 150 5F. The av-
er age results of duplicate tests on the speci-
ASTM D1182-84- Method of Test for
mens shall agree within 50 g.
Apparent Density and Bulk Factor of
Granular Thermoplastic M 01 d i n g
3.4 Granulation. The material Shall have
Powder.
a granulation conforming to table I, when
tested as specified in 4.5.3.
(Applications for copies of the above standards
should be addressed to the American Society for
TABLE I. Granulation
Testing Materials, 1916 Race Street, Philadelphia
3, Pa. )
3. REQUIREMENTS
3.1 Material. The thickener shall be an in-
timate mixture of 97.0 0,5 parts of thick-
Moisture. The thickener shall contain
3.5
ening agent (3.1.1 ) and sufficient approved
not more than 1.2 percent by weight of
antiagglomerant (6.3) to total 100 parts by
moisture when tested as specified in 4.5.4.
weight. The supplier shall certify that the
material complies with this requirement,
3.6 Chlorides. The thickener shall contain
not more than 0.3 percent by weight of chlo-
3.1.1 Thickening agent. The thickening
rides when tested as specified in 4.5.5.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals