 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-50009A
of thickener, packaged as specified in 5. 1.1.1,
of the fully removable head type with bolted
shall be packed in one layer of two rows in a
ring cover. The cover shall be provided with
snug-fitting class 2, style 2L nailed wood
either a flowed-in or continuous solid rubber
box conforming to Specification PPP-B-621,
gasket under the curl. Strip sponge rubber
with approximate inside dimensions of 15,
gaskets shall not be used, After effecting or
b y 1 4 ~ by 7 inches. To separate cans,
tight closure, a hexagonal locknut shall be
used to prevent loosening at the closing nut.
each box shall be provided with interlocking,
half-slotted partitions constructed from W6c
All metal surfaces of the drum shall be
fiberboard conforming to Specification PPP-
treated and painted in accordance with re-
B-636, and filler pads, fabricated from the
quirements of type C, Specification MIL-T-
same material as the partitions, shall be used
704, except all exterior surfaces of drums
as required to make a tight pack. The box
shall have a finish coat of enamel conforming
shall be closed in accordance with the re-
to either Specification MIL-L-73, MILE-
quirements of Specification PPP-B-621, ex-
74, or MIL-E-10687. The color of the enamel
cept that all nails used to secure top shall be
shall conform to color No. 36231 of Federal
driven only into the horizontal cleats at top
Standard No. 595. A copy of mixing instruc-
of the box. Strapping shall be in accordance
tions packaged as specified in 5.2.1.1 shall be
with the appendix thereto, using galvanized
affixed to the inside cover of drum, with a
strapping. A waterproof envelope, 4 by
suitable adhesive, prior to drum closure.
5 inches in size, containing mixing in-
structions shall be securely tacked to the un-
5.3 Marking. In addition to any special
m a r k e d end of the box between the box
marking required by the contract or order,
unit packages and shipping containers shall
cleats.
b e marked in accordance with Standard
MIL-STD-129, The tops of exterior con-
5.2.1.2 Twenty-pound quantity. Twenty-
tainers shall contain the following additional
pound quantities 4 ounces shall be packed
markings in 2-inch letters of a contrasting
in 5-gallon drums conforming to type II,
color:
class 2 of Specification PPP-D-760. All sur-
faces of the drum shall be treated in accord-
"DO NOT OPEN EXCEPT FOR USE OR
ance with Specification MIL-T-704, type C,
INSPECTION
e x c e p t that all interior surfaces shall be
MIXING INSTRUCTIONS INSIDE"
coated in accordance with the applicable re-
quirements of the container specification,
6. NOTES
and all exterior surfaces shall be finished
w i t h one coat of enamel conforming to
6.1 Intended use. The material covered by
either Specifications MIL-L-73, MIL-E-74,
this specification is intended for batch mix-
or MIL-E-10687, with enamel color con-
i n g of thickened fuels for use in flame
forming to color No. 36231 of Federal Stand-
throwers.
ard 595. A copy of mixing instructions pack-
aged as specified in 5.2.1.1 shall be affixed
6.2 Ordering data. Procurement documents
to the inside cover of drum, with a suitable
should specify the title, number, and date of
adhesive, prior to drum closure.
this specification.
5.2.1.3 One hundred-pound quantity. Three
6.3 Antiagglomerant. The following ma-
bags of thickener, packaged as
terials have been tested and found to be
specified in 5.1.1.2, shall be packed in an 18-
satisfactory antiagglomerants:
gage steel 30-gallon drum conforming to
Specification 37A of Interstate Commerce
(a) Santocel C -- Monsanto Chemical
Commission Regulations. The drum shall be
Company.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals