 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-50382(MU)
4.2.2 Contractor testing. - When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection Provisions.
4.3.1 Submission of product. - Unless otherwise specified by the
contracting officer, inspection lot size, lot formation and presentation
of lots shall be in-accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. - All components and sub-
assemblies shall be inspected in accordance with the inspection provisions
contained in Supplementary Quality Assurance Provisions (SQAP) listed in
the List of Inspection Documents (IEL), when provided with the technical
data package (TDP). In the absence of SQAPS, the applicable Quality
Assurance Provisions of MIL-F-13926 shall apply.
4.3.2.2 Final acceptance inspection. - Subsequent to first article
approval, examination and tests related to Section 3 herein shall be
performed on a single defect (Individual characteristic) basis in accord-
ance with MIL-STD-105 and the sampling plans specified in Table I herein.
Examination and tests for Packaging, Packing and Marking shall be in
accordance with MIL-P-14232 and Section 5 herein. The tabulated classifi-
cation of defects in Table I shall constitute the miniuum inspection to
be performed by the supplier after first article approval and prior to
Government acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
TEST PROCEDURE
CHARACTERISTIC
CLASS
CRITICAL: 100% Inspection
4.6.1.1
3.6.1
1. Pressure (optical assembly)
4.6.1.1.1
3.6.2
2. Pressure (counter assembly)
AQL 1.0% Defective
MAJOR :
4.7.2.1
3.7.1
101.
Previbration collimation
4.7.2.1.1
3.4.3
Vibration
102.
4.7.2.1.2
3.4.3
Post-vibration collimation
103.
4.7.2.1.3
3.7.2.1
104.
Image wander
4.7.2.1.4
3.5
Cleanliness
105.
4.7.2.1.5
3.7.2
Image tilt
106.
4.7.2.1.6
3.7.4
Parallelism of image & reticle
107.
4.7.2.1.7
3.7.7
108.
Eyepiece focus
4.7.2.1.8
3.7.9
109.
Parallax
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals