 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-50384(MU)
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. - Unless otherwise specified in
the contract or purchase order, the supplier is responsible for the per-
formance of all inspection requirements as specified herein. Except as
otherwise specifiedm, the supplier may utilize his own facilities or any
other facilities suitable for the performance of the inspection require-
ments specified herein, unless disapproved by the Government. The Govern-
ment reserves the right to perform any of the inspections set forth in
the specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.1.1 General provisions. - The component and subassembly inspection
requirements of MIL-F-13926 form a part of the quality assurance provisions -
of this specification. Definitions of inspection terms shall be as listed
in MIL-STD-109.
4.2 First article (initial production) approval. - The requirement
for first article approval and the responsibility (Government or contractor)
for first article testing shall be as specified in the contract. The
sample for first article approval tests shall consist of three (3) tele-
scopes plus three (3) each of all items covered by SQAP . The sample shall
be manufactured in the same manner, using the same materials, equipment,
processes, and procedures as used in regular production. All parts and
materials, including packaging and packing, shall be obtained from the
same source of supply as used in regular production.
4.2.1 Government tesrting. - When the Government is responsible for
conducting first article approval tests, the contractor, prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a
record of this inspection with the sample, including certificates of
conformance for materials.
4.2.2 Contractor testing. - When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product. - Unless otherwise specified by the
contracting officer, inspection lot size, lot formation and presentation
of lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. - All components and sub-
assemblies shall be inspected in accordance with the inspection provisions
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals