 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-50760(MU)
4.2.1 Government testing. - When the Government is responsible for
conducting first article approval tests, the contractor, prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a re-
cord of this inspection with the sample, includingt certificates of confor-
mance for materials.
4.2.2 Contractor testing. - When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product. - Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. - All components and subassemb-
lies shall be inspected in accordance with the inspection provisions con-
tained in Supplementary Quality Assurance Provisions (SQAP) listed in the
technical data package (TDP0. In the absence of SQAP'S, the applicable
Quality Assurance Provisions of MIL-F-13926 shall apply. Examination and
tests related to Section 3 herein, shall be performed on asingle defect
(individual characteristic) basis in accordance with MIL-STD-105 and the
sampling plans specified in Tables I, II and III herein. Examination and
tests for packaging, packing, and marking shall be in accordance with MIL-
P-14232 and Section 5 herein. The tabulated classification of de3fects in
Tables I, II and III shall constitute the minimum inspection to be perform-
ed by the supplier after first article approval and prior to Government
acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
REQUIREMENT
TEST PROCEDURE
CLASS
CRITICAL: NONE
MAJOR: AQL 0.657. Defective
4.6.2
3.5.2
101. Vibration
102. Sealing
4.6.3
3.5.3
4.6.4
3.5.4
103. Cleanliness
4.6.5
3.6.3
104. Resolution
4.6.6.1
3.6.1
105. Collimation
4.6.6.2
3.6.2
106. Parallax
4.6.6.3
3.6.4
107. Parallelism of reticle and image
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals