 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-50760(MU)
4.6.6.4
3.6.5
108.
Reticle accuracy
4.6.6.5
3.6.6
109.
Eyepiece focus
4.6.7
3.6.7
110.
Illumination
4.6.8
3.4
Workmanship
111.
MINOR: NONE
The tests in Table I shall be conducted at a temperature between
NOTE:
60 and 90F.
4.3.3 Acceptance and rejection. - Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and resubmittance of rejected lots shall be in accordance with "Accept-
ance and Rejection" as specified in MIL-sTD-105.
Special sampling.
4.4.1 General. - One telescope shall be selected at random as a speci-
al sampling from each 100 produced. The sample shall meet the requirements
and tests in Table II.
TABLE II
TEST PROCEDURE
REQUIREMENT
NO.
CHARACTERISTIC
3.1
Applicable Draw-
301.
Fabrication
ing ing - Visual
302.
3.2
MIL-F-13926,
General specification
Visual
The tests in Table II shall be conducted at a temperature between
NOTE:
60 and 90F.
4.4.2 Environmental. - Three telescopes shall be selected at random
as samples from each 50 produced, or from each month's production, which-
ever occure first. Each sample shall meet the requirements and tests in
Table III and shall then meet the requirements and tests in Table I.
TABLE III
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
No.
4.6.1
3.5.l
303.
Storage temperature (-80F)
4.6.1,
3.5.1,
304.
Condensation (low temperature
4.6.1.1
3.5.3.1
-80F)
4.6.1.2
3.5.1
305.
Storage temperature (+160F)
4.4.3 Failure of sample. - Should any one item of a special sampling
fail to meet the specified test requirements, acceptance of the represent-
ed inspection lot shall be suspended by the Government until necessary
corrections have been made by the Contractor and the resubmitted items
have been approved (see 4.3.3).
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals