 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-52843C
unless evidence to the contrary is furnished by the contractor and
such evidence is acceptable to the contracting officer.
4.5 Quality conformance inspection.
4.5.1 Examination. Each forklift shall be examined for the defects
marked "X" in column 2 of table III (see 4.6.1). Presence of one or
more defects shall be cause for rejection.
4.5.2 Tests. Each forklift shall be tested as specified in column
3 of table IV (see 4.6.2). Failure of any test shall be cause for
rejection.
4.5.3 Sampling.
4.5.3.1 Unit of product. A unit of product is defined as a fully-
serviced forklift.
4.5.3.2 Lot. A lot shall consist of not more than 25 units of
product. Lots shall be formulated from forklifts which have
successfully completed the individual examination and tests as
specified in 4.5.1 and 4.5.2.
4.5.3.3 Sample
tests. One sample shall be selected from each lot
(25) and shall be
subjected to the tests specified in 4.6.2.4,
4.6.2.5, 4.6.2.6,
4.6.2.18,(test method 17 only). Any sample failing
any test shall be
cause for rejection of lot.
4.6 Inspection schedule.
4.6.1 Examination. Forklifts shall be examined as specified herein
in accordance with table III. An "X" in the column indicates the
examination that shall be conducted.
47
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals