 |
|||
|
Page Title:
First article demonstration report |
|
||
| ||||||||||
|
|  MIL-T-53019(ME)
a.
Adjustment of mast assembly.
b.
Adjustment of solid state control modules.
c.
Adjustment of brake system.
d.
Adjustment of steering.
e.
Continuity check of the electrical system.
f.
Filling and charging of the battery.
4.6 First article demonstration report . The contractor shall prepare and
submit the first article demonstration report to the contracting officer for
approval within the time frame specified (see 6.2). The report shall include
a detailed description of the examination and demonstration performed. All
deficiencies encountered and actions taken to correct the deficiencies shall
be included.
4.7 Inspection of packaging . The preservation, packing, and marking of
forklifts shall be inspected for conformance to the requirements of appendix
B, MIL-STD-162.
5.
PACKAGING
5.1 Preservation, packing, and marking . Preservation, packing, and marking
shall be level A, level B, or commercial, as specified (see 6.2).
5.1.1 Level A or B. Preservation, packing, and marking shall be in
accordance with MIL-STD-162, level A or B as applicable, for type I or II, as
specified (see 6.2).
5.1.2 Commercial. Each complete forklift and all items issued with it
shall be suitably preserved and packed for retail distribution directly to a
using customer and in a manner to assure carrier acceptance and safe delivery
to destination at the lowest ratings in compliance with carrier rules and
regulations applicable to the mode of transportation. In addition, the
following specific requirements shall be accomplished. Items with critical
surfaces required for fit or function shall be provided protection by the use
of preservative coating, volatile corrosion inhibitor, or desiccated packs.
Items requiring protection from physical damage to surfaces or which are
fragile by nature shall be protected by wrapping, pack compartmentization , or
cartonizing of the individual item. A guide shall be furnished indicating the
preservation and packing materials to be removed, in detail, and any other
servicing required prior to placing the forklift in operation. Marking shall
reflect as a minimum, the item name, national stock number, quantity, contract
number and appropriate address markings on each unpacked item or shipping
container. The marking shall be applied with a waterproof material and shall
provide a definite contrast.
6.
NOTES
6.1 Intended use. Forklifts described herein are intended for stacking and
unstacking, and moving long loads and pallet loads of missiles and ammunition
in and around storage magazines. Forklifts are intended for operation over
paved and other hard surfaces for short distances.
6.2
Ordering data.
Acquisition documents should specify the following:
17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals