Except as specified in 3.1.1 through 188.8.131.52, no removal, substitution or alteration of the chassis
manufacturer's standard or optional chassis model components shall be made. All chassis items
shall be as represented in the chassis manufacturer's technical data and the body and mounted
equipment shall be as represented in the body and equipment manufacturer's technical data.
Technical data shall be limited to specifications and technical material identical to that furnished
to the authorized company representatives for selection of vehicle models and components, and
shall be available to the engineering offices of the procuring activity, prior to the delivery of the
items. The chassis model furnished shall be not older than the chassis manufacturer's current
model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
184.108.40.206 Treatment and painting. The vehicle shall be treated and painted in accordance
with MIL-STD-1223. As specified by the procuring activity for the appropriate military service
(see 6.2), the exterior color shall be in accordance with MIL-STD-1223.
220.127.116.11 Marking and data plates. As specified by the procuring activity for the
appropriate military service (see 6.2), identification marking and data plates shall be in
accordance with MIL-STD-1223. When specified (see 6.2) concealed markings shall be
18.104.22.168 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance
with FED-STD-297 shall be furnished.
22.214.171.124 Drain plugs. All drain plugs installed in manual transmissions and rear axles
shall be of the permanent magnet type.
126.96.36.199 Wood treatment. When specified (see 6.2), wood shall be treated in accordance
188.8.131.52 Towing devices. Towing devices consisting of two hooks, loops, eyes or pins or
the chassis manufacturer's standard single center mounted eye or pin shall be mounted on the
front of the vehicle.
184.108.40.206 Spark arrester. As specified herein (see 3.4.4), the vehicle shall be furnished with
an exhaust system spark arrester.
220.127.116.11 Air transportability. When specified (see 6.2), the vehicle shall be air
transportable in C-5A aircraft in accordance with the requirements of MIL-STD-1791 and AFSC
Design Handbook DH-1-11. Removal or relocation of mechanically attached (nonwelded,
nonriveted, etc.) components with hand tools, requiring not more than 1 manhour total to