Click here to make tpub.com your Home Page

Page Title: Quality Assurance Provisions
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-62097C
*
3.7.8 Floor installation and floor covering. The material used to enclose the floor area
shall be securely installed and free of gaps, open seams, cuts, or open holes. All wood parts shall
be free of cracks or splinters and thoroughly treated to provide full and uniform coverage. The
material shall be applied to provide uniform coverage, free of thin or bare areas. The carpeting
shall be installed securely and fitted without gaps, visible seams, bulges, frayed edges or color
fade.
*
3.7.9 Electrical system installation. The electrical system shall be installed to provide
proper routing for electrical wiring with clearances between wiring and applicable parts. All
wiring shall be secured and fastened at all points of bending and protected against chafing and
damage. Wiring shall be concealed and easily accessible for repairs. All circuits shall be
properly grounded. Electrical wiring covering shall be free of cracks, cuts, kinks, frays, or
similar defects. All wiring and outlets shall be securely installed, free of loose or faulty
connections. Wall outlets and other receptacles shall be conveniently located and installed
uniformly. All electrical appliances and fixtures shall be mounted securely and properly
positioned to prevent damage during transit.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract, the
contractor is responsible for the performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract, the contractor may use his own or any other
facilities suitable for the performance of the inspection requirements specified herein, unless
disapproved by the Government. The Government reserves the right to perform any of the
inspections set forth in the specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
*
4.1.1 Responsibility for compliance. All items must meet all requirements of sections 3
and 5. The inspection set forth in this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection requirements in the
specification shall not relieve the contractor of the responsibility for ensuring that all products or
supplies submitted to the Government for acceptance comply with all requirements of the
contract. Sampling inspection, as part of manufacturing operations, is an acceptable practice to
ascertain conformance to requirements, however, this does not authorize submission of known
defective material, either indicated or actual, nor does it commit the Government to acceptance
of defective material.
4.2 Government verification. Quality assurance operations performed by the contractor
will be subject to Government verification at unscheduled intervals. Verification will consist of
observation of the operations to determine that practices, methods, and procedures of the
23

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business